Victron Energy Quattro 24/5000/120-100/100 230V VE.Bus

• Brand: Victron Energy

• Product range: Quattro

• Model: Quattro 24/5000/120-100/100

• Manufacturer part number: QUA245021010

• Product type: Inverter charger with integrated transfer switch

• Nominal battery voltage: 24V DC

• DC input voltage range: 19–33V DC

• Continuous inverter rating: 5,000VA

• Continuous output at 25°C: 4,000W

• Continuous output at 40°C: 3,700W

• Continuous output at 65°C: 3,000W

• Peak power: 10,000W

• AC output voltage: 230V AC ±2%

• Output frequency: 50Hz ±0.1%

• Output waveform: Pure sine wave

• Maximum inverter efficiency: Up to 94%

• Battery charging current: 120A

• Number of AC inputs: 2

• Maximum AC input pass-through current: 2 × 100A

• Number of AC outputs: 2

• PowerControl: Yes

• PowerAssist: Yes

• Communications interface: VE.Bus

• Protection rating: IP21

• Cooling: Fan-assisted

• Operating temperature: -40°C to +65°C, subject to output derating and installation conditions

• Battery connections: M8 bolts

Physical specifications

• Dimensions (H × W × D): Approximately 470 × 350 × 280mm

• Weight: Approximately 30kg

Specifications are based on the Victron Energy Quattro 3kVA–15kVA technical documentation. Confirm the latest manufacturer's datasheet before installation.

Applications and Intended Use

Off-Grid Solar and Battery Systems

Converts stored energy from a compatible 24V battery bank into 230V AC electricity for appliances, electrical equipment and other suitable loads. It can be integrated with compatible solar charge controllers and battery monitoring equipment.

Marine and Boat Electrical Systems

Suitable for larger onboard power systems requiring battery-powered AC electricity, battery charging and automatic switching between shore power and generator supplies.

Motorhomes and Campervans

Provides inverter power for suitable onboard appliances and electrical systems where a substantial 24V battery bank is installed.

Backup Power Systems

Supports continuity of supply for compatible equipment when the normal AC source fails, subject to correct system configuration and available battery capacity.

Commercial and Remote Installations

Suitable for workshops, remote buildings and other installations requiring integrated inverter, charger and AC source management.

Hybrid Energy Systems

Can form part of a professionally designed energy storage system incorporating compatible batteries, solar charging equipment, generators and Victron monitoring products.

Installation and Compatibility

The Victron Quattro 24/5000 is designed for integration into a correctly engineered 24V electrical system. Battery capacity, DC cable sizing, protective devices, ventilation, earthing and AC distribution must be selected to suit the expected loads and installation requirements.

The two AC inputs can be configured for independent supplies, such as shore power and a generator. The unit automatically selects an available source according to its configuration.

VE.Bus connectivity supports compatible Victron system integration, including parallel and three-phase configurations where supported. When paired with a compatible GX device, the system can also provide local and remote monitoring through Victron's VRM platform.

Battery chemistry and charging parameters must be configured appropriately. Installation and commissioning should be carried out by a suitably qualified professional.

Product Identification

• Manufacturer: Victron Energy

• Model number: QUA245021010

• Full designation: Quattro 24/5000/120-100/100 230V VE.Bus

• Category: Victron Energy Inverter Chargers

• System voltage: 24V DC

• AC output: 230V AC

The Victron Energy Quattro 24/5000/120-100/100 is a versatile inverter charger for demanding 24V battery installations, combining high-capacity battery charging, pure sine wave AC conversion and automatic management of two AC power sources.